Features and advantages
n Non-contacting sensor IC based on the principle of electromagnetic induction
n Compared with Hall sensor, It has stronger stray field immunity without additional shielding.
n Absolute rotational angle detection, relative rotational angle difference detection and linear position detection
n No magnet is required, and the system cost is lower
n High resolution, apply equally to small angle
n High precision, error ≤ 0.15% of the range
n Built-in non volatile storage unit, Support customer’s EOL programming
n Upper and lower limits or programmable duty ratio
n Built-in torque algorithm, programmable gating
n Programmable output mode:Analog、PWM、SENT
n Programmable PWM output frequency :64Hz~4kHz
n Support EMC and enhance SENT, programmable double speed SENT
n Programming and correction of rotor offset
n Non-linear compensation, such as air gap deviation, coil inconsistency
n Open short circuit detection
n Over-pressure Protection and reverse voltage protection
n 48-bit customer ID number., 48-bit FFI ID can achieve traceability
n Single die SSOP20 package, Pb-free and compliance with RoHS
n AEC-Q100 Ready,operating temperature from -40°C to 150°C
Typical application
n Absolute rotational angle position sensor
n Absolute linear position sensor
n EPS(TAS、TOS)Electrical Power Steering torque and Angle sensor
n Brake,accelerator,clutch pedal position sensor
n Throttle position sensor
n Automotive seat adjustment
n Electric rear-view mirror adjustment
n Liquid-level sensor
n Height position sensor
n Non-contact potentiometer